Sign In | Join Free | My remastersys.com
China ShenZhen Vector Technology Co., Ltd. logo
ShenZhen Vector Technology Co., Ltd.
More Flexible, More Accurate
Verified Supplier

2 Years

Home > CNC Servo Drive >

Vector 22KW CNC Servo Drive For Wood CNC Processing Machine

ShenZhen Vector Technology Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

Vector 22KW CNC Servo Drive For Wood CNC Processing Machine

  • 1
  • 2

Brand Name : Vector

Model Number : VEC-VC-04533H-M-EA

Certification : CE

Place of Origin : China

MOQ : 1 kit

Price : To Be Discussed

Payment Terms : T/T, Western Union, L/C

Supply Ability : 500 kits/month

Delivery Time : 3-5 work days

Packaging Details : 280*208*78mm,375*290*155mm

Voltage : 380V

Power : 22KW

Phase : 3 Phase

Communication Protocols : CanOpen / Ethercat / Modbus

Encoder : 2500 pulse incremental + Hall encoder;

Rated Current : 45A

Input/Output : Pulse / Analog

Control Mode : Torque/Location/Speed

Application : Wood CNC Processing Machine

Product Name : Servo Drive For Wood CNC Processing Machine

Contact Now

Electric Motors, AC Servo Motor, Servo Drive For Wood CNC Processing Machine

Servo Drive For Wood CNC Processing Machine
AC Power 22KW
Three Phase 380V
Modbus / CanOpen / EtherCAT
Location / Speed / Torque Control Mode
2500 pulse incremental + Hall encoder;

Products Description

Product NameHigh-Speed 2.2Kw 220V AC Servo Motor Drive
BrandVector
Model No.VEC-VC-04533H-M-EA
Power22KW
Input/OutputPulse / Analog
Voltage380V
PhaseThree Phase
Rated Current45A
Communication ProtocolsModbus / CanOpen / EtherCAT
Encoder2500 pulse incremental + Hall encoder;

VoltageControl ModeSingle-phase / three-phase full-controlled rectification
SVPWM modulation
EncoderEncoder Feedback2500 pulse incremental + Hall encoder;
2500 pulse incremental;
17bit Tamagawa absolute encoder;
23bit Tamagawa absolute encoder;
24bit Nikon absolute encoder;
Pulse Command InputPulse TypeDifferential input,Open collector
Frequency RangeDifferential input:0-500kHz,pulse width greater than 1us
Open collector: 0-300kHz,pulse width greater than 2.5us
Pulse Modepulse + direction; AB pluses; CW+CCW;
Analog InputVoltage Range-10V to 10V
Input Impedance10kΩ
Maximum Frequency1.5kHz
DI/DO Interface TypeNPN/PNP
CommunicationModbus/CANopen/EtherCAT

Installation Precautions


● Install the driver on a dry and sturdy platform. Maintain good ventilation and

heat dissipation during installation and maintain good grounding.

● Please install in the specified direction to avoid malfunction.

● When installing, please ensure that the servo driver is kept at a specified distance from the inner

surface of the cabinet and other machines, otherwise it may cause fire or malfunction.


Installation
Environment
Requirements
Atmospheric Pressure86~106kPa
Mbient Humidity0~55℃
Ambient Temperature0~90%RH
IP RatingIP20
Vibration0~4.9m/s^2



Key NameKey function
PAR/ALMmode switch, return to the previous menu
▲(add)increase flashing bit value of the LED digital tube
▼(dec)Decrease flashing digit value of the LED digital tube
STOP/RSTMoves the blinking LED tube to the left; checks the high value of data
longer than 5 bits; Fault reset;execute Fn function
RD/WTread/write parameter values;enter fn page

Operating precautions

● in the test operation, in order to prevent accidents, please test the servo motor with no load

(not connected to the driver shaft), otherwise it may cause injury.

● when starting to operate on the supporting machine, set the user parameters that match the machine

in advance. If you start operation without parameter setting, it may cause mechanical loss or malfunction.

● to avoid accidents, install a limit switch or a stopper at the end of the movable part of the machine,

otherwise it will cause mechanical damage or injury.

● do not make extreme changes to the parameter settings, as this may result in unstable operation,

mechanical damage or injury.

●when the power is turned on or the power supply is cut off, the heat sink of the servo driver, external

braking resistor, motor, etc. may be in a high temperature state. Do not touch it, otherwise it may cause burns.

● when using a servo motor on the vertical axis, set a safety device to prevent the work piece from falling under

alarm, over travel, etc. In addition, please perform the servo lock stop setting when an over travel occurs,

otherwise the work piece may fall in the over travel condition.

● do not enter the operating range of the machine during operation, otherwise it will cause injury.

● do not touch the servo motor or the movable part of the machine during

operation, otherwise it will cause injury.

● please set up the safety system to ensure safety even in the event of a signal line breakage. For example,

when the positive over travel switch (P-OT) and negative over travel switch (N-OT) signals are disconnected

at the factory setting, they operate safely.

● be sure to set the servo OFF state when turning off the power.

● do not turn the power on/off frequently. After the actual operation starts, the power ON/OFF interval should

be more than 1 hour, otherwise the components inside the servo unit will be prematurely aged.

●when an alarm occurs, reset the alarm after the cause is removed and ensure

safety, and restart the operation, otherwise it may cause injury.

● do not use the brake of the brake motor for normal braking, otherwise it may cause a malfunction.


Accessories:


Accessory nameImage
Satandard Spare PartsPower terminalAdapt to E1,E2 structure drive
Cn3 encoder plugEncoder plug on the driver side
Cn4 control terminal plugInput/output signal terminals,user wiring
Encoder connection lineThe standard cable length is 3, 5, 8, 10, 13, 15 meters, according to customer
needs Provide independent connector
Power lineThe standard cable length is 3, 5, 8, 10, 13, 15 meters, according to customer
needs Provide independent connector
Drive monitoring lineConnect and adjust the software for remote monitoring and firmware update
Purchasing Spare PartsUSB to RS232 Adapter cableIf necessary, self purchase
Ethernet communication lineIf necessary, self purchase


Certificates
1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical, thermal and energy in Section 5-1 of the
variable speed electric driver system), corresponding to the national standard GB12668.501-2013;
3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system part 3 electromagnetic compatibility
standards and its specific test methods), corresponding to the national standard GB12668.3-2012.


Quality Checking:
Four times Production testing
Two Times 24 hoursTesting
100% Inspection Before Shipping

Delivery Time and Shipping Way

1. For small order we always can delivery out within 1 week.
2. Our products can be shippied via Air, Land or Sea.

Packing details of Servo Drive
ProductsE1(3-6A)E2(7-12A)E3(16-27A)
Ctn. Size280*208*78280*208*112375*290*155

Packing:


Packing details of Servo Drive
ProductsE1(3-6A)E2(7-12A)E3(16-27A)C015(32-38A)C022(45-60A)
Ctn. Size280*208*78280*208*112375*290*155440*296*288510*305*325


Our Team:


Product Tags:

Vector 22KW CNC Servo Drive

      

22KW CNC Servo Drive

      

Vector 22KW CNC Machine Drive

      
Cheap Vector 22KW CNC Servo Drive For Wood CNC Processing Machine for sale

Vector 22KW CNC Servo Drive For Wood CNC Processing Machine Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: ShenZhen Vector Technology Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)